Tek Tronics My Account  Cart Contents  Checkout  
  Top » Catalog » Programmers » upa-Pset My Account  |  Cart Contents  |  Checkout   
Categories
BDM100
ECU Flasher
OBD Diagnostic
Immobiliser Repair
Key Programmers
Renault Repair
Programmers
Airbag Repair
Desoldering Tools
Software
What's New? more
SMD Test Probe Set
SMD Test Probe Set
80.00
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
Gift Voucher FAQ
UPA-USB programming adapter set
[upa-Pset]
60.00 45.00
Ask a question about
this product...

UPA-USB programming adapter set 

This is the original product, built with quality components and made to last.

Product Information

The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable. It's equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.

Device configuration is done over special config keys which make the work convenient and safe compared to wiring up all manually.
Additional packages can be covered by commonly available Adapters plugged into the 40 pin ZIF socket.

The main Device further includes a 10 pin ISP connector where the included ISP Adapters can be connected using a standard 1:1 flatribbon cable (included). The included PLCC ISP Adapters are to be put directly over the soldered chip of the target device making the work convenient and safe compared to soldering or using clips connecting up all manually. (Power from the UUSP to the ISP target can be enabled or disabled by a jumper next to the 10 pin ISP connector)

 

upa2.JPG
upa3.JPG
upa4.JPG

upa5.JPG

 

upa adapter set.JPG

Package contains:
1 x Mainboard with 40pin DIL ZIF (600mil) socket and 14pin SOIC ZIF (150mil) socket

Config Keys: (For Device configuration)
1 x I2C & SPI Config Key
1 x Microwire Config Key
1 x Microwire Rotated Config Key
1 x Microwire 93(C)S   8 pin Config Key
1 x Microwire 93(C)S 14 pin Config Key
1 x M35080 Config Key
1 x SDA(E)2506 Config Key

PLCC52 ISP Adapters:
1 x CR16MES & CR16MFS ISP Adapter
1 x MC68HC05B ISP Adapter
1 x MC68HC08AS20 ISP Adapter
1 x MC68HC705B16 ISP Adapter
1 x MC68HC11A8/E9 ISP Adapter
1 x MC68HC05H12 ISP Adapter
1 x MC68HC11EA9 ISP Adapter

PLCC68 ISP Adapters:
1 x MC68HC11F1 ISP Adapter
1 x MC68HC11KA2/4 & MC68HC11KS ISP Adapter
1 x MC68HC11L6 ISP Adapter

PLCC84 ISP Adapters:
1 x MC68HC11P2 & MC68HC11PH8 ISP Adapter
1 x MC68HC11K ISP Adapter

1 x DIL to 10pin Flat-ribbon header (For using IC clips or clamps)
(This Adapter is included in the set you purchase but not shown on the photos yet)

1 x Flat-ribbon cable 10pin

EEproms

Simply connect the mainboard to the UPA programmer directly or by using a DB9 male / female extension cable (1:1). Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. You can also use the included DIL to 10pin Flat-ribbon header, put it inside the ZIF socket and wire up an SOIC clip or clamps for ISP use from there.

Motorola MCU's

Pick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the main board's 10pin ISP connector. Select the VCC supply source by the jumper on the mainboard next to the ISP connector (on = target supplied from upa, off = target got own supply). Slide the Adapter over the soldered PLCC MCU on the target PCB. (No soldering, no pinout reviewing, no pin counting, saves lots of time and hassle and let's you make your job faster, precise and easier)

Once your workshop is equipped with our Adapter Set you will have an all new UPA Experience.

Reviews
Customers who bought this product also purchased
CARPROG Universal Repair Tool
CARPROG Universal Repair Tool
CHIP QUIK - SMD291NL
CHIP QUIK - SMD291NL
Nissan NATS Code Calc
Nissan NATS Code Calc
Shopping Cart more
0 items
Notifications more
NotificationsNotify me of updates to UPA-USB programming adapter set
Specials more
K + DCAN USB Interface
K + DCAN USB Interface
79.99
79.99
Reviews more
Write ReviewWrite a review on this product!
Languages
English
Currencies

Copyright 2006 Tek-Tronics

tek-tronics