|
XPROG-M Programmer The XPROG-M programmer is designed to replace the earlier version of XPROG programmer. XPROG-M programmer is fully upward-compatible with the old XPROG programmer and has many additional features. XPROG-M supports in-circuit or on-board programming of Motorola 68HC05 , 68HC08, 68HC11, 68HC(S)12 , HC912, MC9S12, MC9S12X , Texas Instruments TMS370 , MPC5xx, ST10Fxx, ATmega family MCU's and serial EEPROM's. - Motorola HC05 family authorization (allows to read/write EEPROM)
- Motorola HC08 family authorization (allows to read/write EEPROM)
- Motorola HC11 family authorization (allows to read/write EEPROM)
- Motorola HC(S)12 family authorization (allows to read/write EEPROM and flash memory)
- Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
- Motorola HC05B/X family bypass security authorization (allows to read/write secured EEPROM and flash memory)
- ST M35080 read/write/erase authorization
- BMW EWS3 authorization
- ATmega family authorization (allows to read/write EEPROM and flash memory)
- MB ZGS001 authorization
- Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
- National CR16 authorization (allows to read/write EEPROM memory)
Package contents: Main XProg-M Programmer
Full Adapter Set
USB Cable Software Authorization for all the above devices (Software version 5.0)
Adapters for:
TMS370 PLCC28
TMS370 PLCC68
TMS370 PLCC44
TMS374/uPD78 ICP adapter
TMS374 onboard adapter
M35080 ICP Adapter
HC11E/EA adapter
HC05Bx QFP64
HC05Bx QFP52
MC68HC0512
HCS12 adapter This is a fully working and loaded package! Software + Manual can be download here
|
